Text Fields¶

The length of the field is supplied by padding out the field with multiple "<", ">", or "|" characters to specify a non-numeric field with, respectively, left justification, right justification, or centering. For a regular field, the value (up to the first newline) is taken and printed according to the selected justification, truncating excess characters. If you terminate a text field with "...", three dots will be shown if the value is truncated. A special text field may be used to do rudimentary multi-line text block filling; see "Using Fill Mode" for details.

   Example:
      format STDOUT =
      @<<<<<<   @||||||   @>>>>>>
      "left",   "middle", "right"
      .
   Output:
      left      middle    right

Numeric Fields¶

Using "#" as a padding character specifies a numeric field, with right justification. An optional "." defines the position of the decimal point. With a "0" (zero) instead of the first "#", the formatted number will be padded with leading zeroes if necessary. A special numeric field is blanked out if the value is undefined. If the resulting value would exceed the width specified the field is filled with "#" as overflow evidence.

   Example:
      format STDOUT =
      @###   @.###   @##.###  @###   @###   ^####
       42,   3.1415,  undef,    0, 10000,   undef
      .
   Output:
        42   3.142     0.000     0   ####

The Field @* for Variable Width Multi-Line Text¶

The field "@*" can be used for printing multi-line, nontruncated values; it should (but need not) appear by itself on a line. A final line feed is chomped off, but all other characters are emitted verbatim.

The Field ^* for Variable Width One-line-at-a-time Text¶

Like "@*", this is a variable width field. The value supplied must be a scalar variable. Perl puts the first line (up to the first "\n") of the text into the field, and then chops off the front of the string so that the next time the variable is referenced, more of the text can be printed. The variable will not be restored.

   Example:
      $text = "line 1\nline 2\nline 3";
      format STDOUT =
      Text: ^*
            $text
      ~~    ^*
            $text
      .
   Output:
      Text: line 1
            line 2
            line 3

Specifying Values¶

The values are specified on the following format line in the same order as the picture fields. The expressions providing the values must be separated by commas. They are all evaluated in a list context before the line is processed, so a single list expression could produce multiple list elements. The expressions may be spread out to more than one line if enclosed in braces. If so, the opening brace must be the first token on the first line. If an expression evaluates to a number with a decimal part, and if the corresponding picture specifies that the decimal part should appear in the output (that is, any picture except multiple "#" characters without an embedded "."), the character used for the decimal point is always determined by the current LC_NUMERIC locale. This means that, if, for example, the run-time environment happens to specify a German locale, "," will be used instead of the default ".". See perllocale and "WARNINGS" for more information.

Using Fill Mode¶

On text fields the caret enables a kind of fill mode. Instead of an arbitrary expression, the value supplied must be a scalar variable that contains a text string. Perl puts the next portion of the text into the field, and then chops off the front of the string so that the next time the variable is referenced, more of the text can be printed. (Yes, this means that the variable itself is altered during execution of the write() call, and is not restored.) The next portion of text is determined by a crude line breaking algorithm. You may use the carriage return character ("\r") to force a line break. You can change which characters are legal to break on by changing the variable $: (that's $FORMAT_LINE_BREAK_CHARACTERS if you're using the English module) to a list of the desired characters.

Normally you would use a sequence of fields in a vertical stack associated with the same scalar variable to print out a block of text. You might wish to end the final field with the text "...", which will appear in the output if the text was too long to appear in its entirety.

Suppressing Lines Where All Fields Are Void¶

Using caret fields can produce lines where all fields are blank. You can suppress such lines by putting a "~" (tilde) character anywhere in the line. The tilde will be translated to a space upon output.

Repeating Format Lines¶

If you put two contiguous tilde characters "~~" anywhere into a line, the line will be repeated until all the fields on the line are exhausted, i.e. undefined. For special (caret) text fields this will occur sooner or later, but if you use a text field of the at variety, the expression you supply had better not give the same value every time forever! ("shift(@f)" is a simple example that would work.) Don't use a regular (at) numeric field in such lines, because it will never go blank.

Top of Form Processing¶

Top-of-form processing is by default handled by a format with the same name as the current filehandle with "_TOP" concatenated to it. It's triggered at the top of each page. See "write" in perlfunc.

Examples:

 # a report on the /etc/passwd file
 format STDOUT_TOP =
                         Passwd File
 Name                Login    Office   Uid   Gid Home
 ------------------------------------------------------------------
 .
 format STDOUT =
 @<<<<<<<<<<<<<<<<<< @||||||| @<<<<<<@>>>> @>>>> @<<<<<<<<<<<<<<<<<
 $name,              $login,  $office,$uid,$gid, $home
 .
 # a report from a bug report form
 format STDOUT_TOP =
                         Bug Reports
 @<<<<<<<<<<<<<<<<<<<<<<<     @|||         @>>>>>>>>>>>>>>>>>>>>>>>
 $system,                      $%,         $date
 ------------------------------------------------------------------
 .
 format STDOUT =
 Subject: @<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
          $subject
 Index: @<<<<<<<<<<<<<<<<<<<<<<<<<<<< ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<
        $index,                       $description
 Priority: @<<<<<<<<<< Date: @<<<<<<< ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<
           $priority,        $date,   $description
 From: @<<<<<<<<<<<<<<<<<<<<<<<<<<<<< ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<
       $from,                         $description
 Assigned to: @<<<<<<<<<<<<<<<<<<<<<< ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<
              $programmer,            $description
 ~                                    ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<
                                      $description
 ~                                    ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<
                                      $description
 ~                                    ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<
                                      $description
 ~                                    ^<<<<<<<<<<<<<<<<<<<<<<<<<<<<
                                      $description
 ~                                    ^<<<<<<<<<<<<<<<<<<<<<<<...
                                      $description
 .

It is possible to intermix print()s with write()s on the same output channel, but you'll have to handle "$-" ($FORMAT_LINES_LEFT) yourself.

Format Variables¶

The current format name is stored in the variable $~ ($FORMAT_NAME), and the current top of form format name is in $^ ($FORMAT_TOP_NAME). The current output page number is stored in $% ($FORMAT_PAGE_NUMBER), and the number of lines on the page is in $= ($FORMAT_LINES_PER_PAGE). Whether to autoflush output on this handle is stored in $| ($OUTPUT_AUTOFLUSH). The string output before each top of page (except the first) is stored in $^L ($FORMAT_FORMFEED). These variables are set on a per-filehandle basis, so you'll need to select() into a different one to affect them:

    select((select(OUTF),
            $~ = "My_Other_Format",
            $^ = "My_Top_Format"
           )[0]);

Pretty ugly, eh? It's a common idiom though, so don't be too surprised when you see it. You can at least use a temporary variable to hold the previous filehandle: (this is a much better approach in general, because not only does legibility improve, you now have intermediary stage in the expression to single-step the debugger through):

    $ofh = select(OUTF);
    $~ = "My_Other_Format";
    $^ = "My_Top_Format";
    select($ofh);

If you use the English module, you can even read the variable names:

    use English '-no_match_vars';
    $ofh = select(OUTF);
    $FORMAT_NAME     = "My_Other_Format";
    $FORMAT_TOP_NAME = "My_Top_Format";
    select($ofh);

But you still have those funny select()s. So just use the FileHandle module. Now, you can access these special variables using lowercase method names instead:

    use FileHandle;
    format_name     OUTF "My_Other_Format";
    format_top_name OUTF "My_Top_Format";

Much better!

Footers¶

While $FORMAT_TOP_NAME contains the name of the current header format, there is no corresponding mechanism to automatically do the same thing for a footer. Not knowing how big a format is going to be until you evaluate it is one of the major problems. It's on the TODO list.

Here's one strategy: If you have a fixed-size footer, you can get footers by checking $FORMAT_LINES_LEFT before each write() and print the footer yourself if necessary.

Here's another strategy: Open a pipe to yourself, using "open(MYSELF, "|-")" (see "open()" in perlfunc) and always write() to MYSELF instead of STDOUT. Have your child process massage its STDIN to rearrange headers and footers however you like. Not very convenient, but doable.

Accessing Formatting Internals¶

For low-level access to the formatting mechanism. you may use formline() and access $^A (the $ACCUMULATOR variable) directly.

For example:

    $str = formline <<'END', 1,2,3;
    @<<<  @|||  @>>>
    END
    print "Wow, I just stored `$^A' in the accumulator!\n";

Or to make an swrite() subroutine, which is to write() what sprintf() is to printf(), do this:

    use Carp;
    sub swrite {
        croak "usage: swrite PICTURE ARGS" unless @_;
        my $format = shift;
        $^A = "";
        formline($format,@_);
        return $^A;
    }
    $string = swrite(<<'END', 1, 2, 3);
 Check me out
 @<<<  @|||  @>>>
 END
    print $string;